FAQs
The main difference between 10-32 and 12-24 threads is their dimensions. 10-32 screws have a diameter of 3/16″ (4.8mm) where as 12-24 screws have a diameter of 7/32″ (5.6mm). M6 threads are 6mm in diameter, only . 4 mm larger than 12-24 screws.
What is the difference between 10-32 and 12 24 rack screws? ›
12-24 rack screws are more common than 10-32 in pre-threaded racks. They are slightly larger and courser than 10-32 hardware. The number “12” is a size designator with no numerical meaning.
Which is stronger 10-24 or 10-32? ›
10-32 reduces the strength of the bolt less than 10-24 as the thread is shallower. They also loosen less easily as the thread angle is shallower.
Which is bigger 10-32 or 10-24? ›
#10 - 24 vs. #10 - 32: These have the same diameter, but the TPI in the first measurement is lower than the second one, so there will be fewer threads per inch of thread length.
What is the size of M6 screw? ›
Bolt Sizes Chart & Metric Bolt Dimensions
Thread Size | Major Diameter (mm) | Minor Diameter (mm) |
---|
M6 | 6.0 | 4.917 |
M7 | 7.0 | 5.917 |
M8 | 8.0 | 6.647 |
M9 | 9.0 | 7.647 |
36 more rows
Is a #10 or #12 screw bigger? ›
when we talk about the diameter #12 screws are bigger than the #10. The diameter for the #10 screws is 3/16″ and #12 screws will be a bit less than 7/32.
What does 10-24 screw size mean? ›
Inch thread sizes are specified by diameter and threads per inch. Diameter is also known as screw size. For those with a diameter smaller than 1/4", screw size is indicated by a number (e.g., #10 or No. 10). For example, a 10-24 screw has 0.190" thread diameter and has 24 threads per inch.
What is the equivalent of a m6 screw in inches? ›
Millimeters to Inch Conversion |
---|
Metric (mm) | Decimal (inches) | Rounded to Nearest 64th (inches) |
---|
6 | 0.236 | 15/64 |
8 | 0.315 | 5/16 |
10 | 0.394 | 25/64 |
30 more rows
Are M5 and 10-32 interchangeable? ›
10-32 and M5 are almost identical. If you're not putting much weight on the rails, you can force one into the other. It will result in minor damage to both the bolt and nut, but it works. I've done this in a pinch, but wouldn't recommend it if you have the opportunity to get the right size.
What size is a #12 screw? ›
American Screw Sizes
THREAD DIAMETER |
---|
Size | Nearest Fraction | Millimeter |
---|
#8 | 5/32 | 4.2 |
#10 | 3/16 | 4.8 |
#12 | 7/32 | 5.5 |
8 more rowsMay 25, 2022
The "M6" refers to the metric size of the screw. In the metric system, the size of a screw is denoted by its major diameter, which is the diameter of the threaded portion of the screw. M6 screws have a major diameter of 6 millimeters.
What is M6? ›
▪M6 is a military propellant (explosive) used in firing heavy artillery (very large. guns) ▪M6 is one of numerous propellant. formulations that the military uses.
What is 10-32 in inches? ›
Conversion table inch/mm
Inch |
---|
5/16 | 10/32 | 0,3125 |
– | 11/32 | 0,34375 |
3/8 | 12/32 | 0,375 |
– | 13/32 | 0,40625 |
28 more rowsFeb 26, 2024
What is the difference between 12-24 and M6? ›
M6 threads are 6mm in diameter, only . 4 mm larger than 12-24 screws. When it comes to racking equipment, 12-24 threads are used with most racks, 10-32 threads are used with Dell equipment, audio rack and M6 metric threads are used with HP equipment.
What size are rack screws? ›
Rack mount screws for data racks are commonly available in two sizes, #12-24 and #10-32. ICC patch panels come with 12-24 rack screws. 12-24 threads are designed into most data racks. 10-32 threads are designed into Dell Equipment and most audio racks.
What is equivalent to M6? ›
DIAMETER & THREAD PITCH CONVERSIONS
INCH | CONVERSION (Diameter) |
---|
COARSE (UNC) | FINE (UNF) | METRIC |
---|
1/4"-20 | 1/4"-28 | M6 |
5/16"-18 | 5/16"-24 | M8 |
3/8"-16 | 3/8"-24 | M10 |
11 more rows
What does 10-32 screw mean? ›
The term 10-32 comes from Unified and American Screw Threads for Bolts, Nuts, and Machine Screws standards published by ANSI B1. 1-1974. The number “10” is simply a size designator. The number “32” refers to the 32 threads per inch.
What is thicker #8 or #10 screw? ›
So a screw head with a diameter of 1/4" was a 6 gauge, 5/16" was an 8 gauge, 3/8" was a 10 gauge and so on.
What is the difference between 1 4 20 and 10 24 screws? ›
Imperial measurement fasteners are classified by threads per inch, so a 1/4-20 bolt has 20 threads per inch (TPI), while a 10-24 screw has 24 threads per inch.
What do the numbers mean on a box of screws? ›
Screw Sizes
For screws measured in inches, diameters of 1/4 inch and smaller (for machine and sheet metal screws) or 5/16 inch and smaller (for wood screws) are expressed with a # and a whole number (ex., a screw with a major diameter of 3/16 inch is a #10 screw). Smaller numbers indicate smaller diameters.