March 21, 2005
2 min read
How can a bullet be traced to a particular gun?
Ann L. Davis of the Virginia Division of Forensic Science and the Virginia Institute of Forensic Science and Medicine, explains.
Most modern handguns and rifles are manufactured based on blueprints that specify their configurations. One of these specifications is a characteristic known as rifling, which refers to the spiral lands and grooves placed into the firearm's barrel to impart a spin on the bullet for accuracy. The number of lands and grooves and the direction in which they twist, either right or left, can be determined by observing the rifling engravings in the barrel. The image at right (top) shows the rifling in a barrel having eight lands and grooves inclined to the left, as seen from the muzzle-end of a firearm. The lands and grooves appear as raised and lowered areas, respectively, in the barrel. These rifling characteristics are then imparted onto a projectile as it spins down the barrel, leaving land and groove impressions on the fired bullet (bottom).
Manufacturers use various cutting, swaging and electrolytic processes to introduce rifling into a barrel, and these processes, as well as others used in the finishing of a firearm, make each barrel unique. A barrel will produce individual markings in addition to a bullet's land and groove impressions as the bullet passes through, and it is these unique markings that an examiner evaluates to determine whether a given bullet was fired from a particular firearm.
The rifling characteristics alone can reveal what brand and/or model of firearm could have fired a specific projectile. To figure out if a bullet could have originated from a specific firearm, however, a forensic firearm and toolmark examiner uses an instrument called a comparison microscope to compare a questioned bullet (one recovered from a crime scene, for example) to bullets test fired from a suspect firearm. Examiners generally test fire into a water recovery tank to obtain comparison bullets for evaluation under the microscope.
On supporting science journalism
If you're enjoying this article, consider supporting our award-winning journalism by subscribing. By purchasing a subscription you are helping to ensure the future of impactful stories about the discoveries and ideas shaping our world today.
A comparison microscope comprises two compound microscopes joined by an optical bridge and one set of eyepieces, or oculars. The configuration is such that the examiner can evaluate items on each of the microscope stages at the same time. A dividing line separates the two items in the field of view, and allows the examiner to vary how much of each item is observed simultaneously.
After evaluation of the test-fired bullets against one another for the presence of repetitive individual microscopic markings, the questioned bullet is mounted on the left stage and one of the test-fired bullets is placed on the right stage. The examiner then assesses the questioned bullet for the same repetitive marks that are present on the test projectiles. If sufficient correspondence is found between the questioned bullet and the test bullets, with no unexplainable differences, the examiner can conclude that the questioned bullet was fired from the suspect firearm. The image above demonstrates corresponding microscopic markings consistent with two bullets having been fired from the same firearm.
